VDO Black Oil Pressure Gauge (electric)

Engine oil pressure is important if you are monitoring oil surge while cornering or accelerating, want to make sure that bearing wear isn't becoming excessive, or - in a worst case scenario - need to confirm that there's in fact oil in the engine!

Illumination through dial and pointer.

12v illumination included – 1 x bulb.

Note: 500kPa = 72.5PSI. 700kPa = 101.5PSI. 1,000kPa = 145PSI. 2800kPa = 406PSI

Installation instructions & wiring diagrams included

Black face, black bezel.

Can be made to look like original Smiths gauges with Dial Reprint, White Needles & Chrome Bezels. See VDO Reprints & Bezels section.

Diameter: 52 mm

Spinlock feature for ease of mounting.

For connectors see: Wiring Plugs for 52mm Gauges (each) - GVS07

Requires sender: VDO Oil Pressure Sender (electric) - GVS06

Note: The Holden/Chev Gen III uses serial data to transfer the signal to the instrument cluster in the original vehicle. To run an aftermarket oil pressure gauge or light you will need a Holden/Chev Gen III Oil Pressure Adaptor (GVS09)